Load Restraint System Melbourne
Secure Your Load in Seconds. Not Minutes.
Built for tradies, transport operators and anyone who moves gear daily, Strap N Go keeps your load secure while saving you time on every job.
Load Restraint Systems in Melbourne, VIC
StrapNGo provides a reliable and efficient load restraint system in Melbourne designed for transport operators, logistics companies and trades working across Victoria. Built specifically for curtain-side trucks and tautliners, our system allows drivers to secure loads quickly without climbing into trailers or handling traditional ratchet straps.
Whether you’re operating across Melbourne, Dandenong, Werribee, Sunshine or regional VIC, StrapNGo helps improve safety, reduce loading times and streamline your delivery operations.
StrapNGo systems are built with durability in mind and can be installed on a wide range of vehicles including utes, vans, trucks and trailers.
Strap N Go was created to solve a simple problem:
securing loads shouldn’t waste your time.
Why StrapNGo Outperforms Ratchet Straps
StrapNGo vs Traditional Ratchet Straps
Traditional ratchet straps are slow, manual and physically demanding. StrapNGo replaces outdated methods with a faster, safer and more efficient load restraint system designed for modern transport operations.
Feature
- Ease of Use
- Time to Secure Load
- Driver Effort
- Climbing Required
- Safety
- Consistency
- Efficiency
- Training Required
- Professional Appearance
- Fast, simple and repeatable system
- Seconds
- Minimal physical effort
- No climbing needed
- Safer, ground-level operation
- Consistent every load
- Speeds up delivery operations
- Minimal Training
- Clean, systemised setup
Traditional Ratchet Straps
- Manual setup every time
- Several minutes per load
- High physical strain
- Often required
- Higher risk of injury
- Varies per driver
- Slows down loading/unloading
- Requires proper technique
- Messy straps and loose ends
Frequently Asked Questions
What is a load restraint system?
A load restraint system is used to secure cargo inside trucks or trailers to prevent movement during transport and ensure safety on the road.
Can StrapNGo be installed on any truck?
StrapNGo can be installed on most curtain-side tautliner trucks commonly used in Australia.
How long does installation take?
Installation times vary depending on the vehicle, but most systems can be installed efficiently by our experienced team.
Is StrapNGo compliant with Australian standards?
Yes, StrapNGo is designed to support safe load restraint practices in line with Australian transport guidelines.
Where do you install StrapNGo systems?
We provide installation services across Victoria, Melbourne and surrounding regions including Dandenong, Werribee, Geelong and regional VIC.
System Information
- The StrapNGo Load Restraint System is proudly Australian made and owned.
- The team at StrapNGo are committed to 100% customer satisfaction.
- Our systems all come with stainless steel components fitted with 2 aluminium ‘sliding’ tracks to avoid rust and corrosion.
- Each unit is designed to cover 2 pallets across. Eg. A 10 pallet truck will require 5 units, a 14 pallet truck will require 7 units and a 22 pallet truck will require 11 units.
- Additional sliding assembly’s (units) can be installed, this is to accommodate for smaller pallets. Eg. skids, euro pallet.
- We recommend for 10 or 12 pallet trucks an additional 2 units, 14 and 16 pallet trucks an additional 3 units, and for 22 and 24 pallet semi’s an additional 4 units.
- All systems come complete with Australian compliant 2.5 tonne ratchet straps.
- We offer a full 1 year warranty on all parts and labour.
Upgrade Your Load Restraint System Today
If you’re looking for a safer, faster and more efficient load restraint system in Sydney, StrapNGo is the ideal solution for your fleet.
Contact our team today to discuss installation, compatibility and pricing, and see how StrapNGo can improve your transport operations.
StrapNGo Melbourne
StrapNGo Load Restraint System Installed at Australia's Leading Truck Body Builders
Contact us today to find your nearest installer
Load Restraint System Melbourne
Load Restraint System Geelong
Load Restraint System Ballarat
Load Restraint System Bendigo
Load Restraint System Shepparton
Load Restraint System Mildura
Load Restraint System Warrnambool
Load Restraint System Traralgon
Load Restraint System Dandenong
Load Restraint System Frankston
Load Restraint System Ringwood
Load Restraint System Footscray
Load Restraint System Broadmeadows
Load Restraint System Werribee
Load Restraint System Craigieburn
Load Restraint System Melton
Load Restraint System Brooklyn
Load Restraint System Truganina
Load Restraint System Laverton
Load Restraint System Derrimut
Load Restraint System Altona
Load Restraint System Sunshine
Load Restraint System Tullamarine
Load Restraint System Campbellfield
Load Restraint System Somerton
Load Restraint System Thomastown
Load Restraint System Pakenham
Load Restraint System Cranbourne
Load Restraint System Officer
Load Restraint System Narre Warren
Load Restraint System Horsham
Load Restraint System Wangaratta
Load Restraint System Sale
Load Restraint System Bairnsdale
Add-ons
Upgrade Your Setup
Take your Strap N Go system even further with purpose-built add-ons designed to increase versatility and performance.
Bungee Unit
Stainless-steel wheel with ball bearings, four wheels are made of solid Teflon. The pulley wheel is also made of stainless steel, it has 3 wheels in individual housings to prevent derailing & increases pull down height.
Triangle for the strap to pass through is also stainless steel, it has a sleeve on the bottom shaft for smooth rolling and has a 3mm slit to allow the strap to be easily inserted.
Extendable Pole with Hook
Included with every system, our smart designed extendable “no slip” pole makes drivers experience even better ensuring simple and immediate hooking of the straps and pulling down of buckles.
